EMC CorporationCorporate Headquarters:Hopkinton, MA 01748-91031-508-435-1000www.EMC.comEMC® Fibre Channel withQLogic Host Bus Adapters in theSolaris
10EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and DriverPlanning zoning and connectio
Installing the HBA driver11Installing and Configuring the HBA and DriverInstalling the HBA driverUsing the QLogic adapter with the Solaris operating s
12EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and Driver4. Copy the appropriate drive
Installing the HBA driver13Installing and Configuring the HBA and Driver2. Install the driver into the host:A list of available packages appears, simi
14EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and Driver4. The pkgadd program perform
Installing the HBA driver15Installing and Configuring the HBA and Driver8. If the driver is version 4.13 or earlier, reboot the host with the reconfig
16EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and Driverc. A message describes the dr
Installing the HBA driver17Installing and Configuring the HBA and Driver• persistent-binding-configuration• fast-error-reporting• extended-logging4. R
18EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and Driver8. Reboot the host with the r
Configuring host files19Installing and Configuring the HBA and DriverConfiguring host filesOnce the EMC storage array has devices assigned with device
EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment2Copyright © 2001–2007 EMC Corporation. All rights reserved.Published July,
20EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and DriverThe persistent binding entry
Configuring host files21Installing and Configuring the HBA and DriverTable 4 Variables in /kernel/drv/qla2.x00.confVariable Default valueRecommended S
22EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and Drivera. In a hub environment, the
Configuring host files23Installing and Configuring the HBA and DriverExample: The following example is a configuration for three QLA2200F HBAs with se
24EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and Driverhba0-link-down-error — Disabl
Configuring host files25Installing and Configuring the HBA and DriverEditing /kernel/drv/sd.conf Note: There is no need to edit the sd.conf file if yo
26EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and DriverNote: Changes to sd.conf will
Configuring host files27Installing and Configuring the HBA and DriverDevice definition files are available on EMC’s FTP server, ftp.emc.com, in /pub/e
28EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and Driver2. Install the SANblade GUI:p
Configuring host files29Installing and Configuring the HBA and Driverby editing the actual file /kernel/drv/qla2x00.conf. When the host is rebooted, t
EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment3Preface ...
30EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and DriverEditing /etc/systemOperation
Configuring host files31Installing and Configuring the HBA and Driver◆ If the system was booted from the SAN using a QLogic adapter, ensure that no ch
32EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and DriverPartitioning and labeling dev
Updating the HBA FCode33Installing and Configuring the HBA and DriverUpdating the HBA FCodeYou can use either of two utilities to update the FCode for
34EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and Driver3. Go into the appropriate HB
Updating the HBA FCode35Installing and Configuring the HBA and DriverCAUTION!If the system has an HBA containing the x86 BIOS, upgrading the HBA to FC
36EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and Driver• For the QLA2202FS-E:./qla2x
Updating the HBA FCode37Installing and Configuring the HBA and Driver6. Double-click the hostname pin located at the upper left of the GUI to display
38EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and DriverSymmetrix/Fabric case studyTh
Symmetrix/Fabric case study39Installing and Configuring the HBA and DriverAs shown in the previous figure and table, the recommended zoning is HBA-bas
EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment4Chapter 2 Configuring a Boot Device on the EMC Storage ArrayConfiguring a S
40EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and DriverConfiguration file entriesFol
Symmetrix/Fabric case study41Installing and Configuring the HBA and DriverHost 3 In /kernel/drv/qla2200.conf:In /kernel/drv/sd.conf:Host 4 In /kernel/
42EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentInstalling and Configuring the HBA and DriverTips for retrieving entries i
Configuring a Boot Device on the EMC Storage Array432Invisible Body Tag EMC supports booting Solaris from the storage array through an EMC-qualifi
44EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentConfiguring a Boot Device on the EMC Storage ArrayConfiguring a Symmetrix
Configuring a Symmetrix boot device45Configuring a Boot Device on the EMC Storage ArraySample output:2. Select the Symmetrix device on which to instal
46EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentConfiguring a Boot Device on the EMC Storage ArrayCreating file systemsCre
Configuring a Symmetrix boot device47Configuring a Boot Device on the EMC Storage ArrayNote: The information about the boot device's path. This i
48EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentConfiguring a Boot Device on the EMC Storage ArrayExample — After modifica
Configuring a Symmetrix boot device49Configuring a Boot Device on the EMC Storage Arraya. At the OK> prompt, type "<HBA-path>" sele
EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment5PrefaceAs part of an effort to improve and enhance the performance and capa
50EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentConfiguring a Boot Device on the EMC Storage ArrayExample: " /pci@1f,
Configuring a Symmetrix boot device51Configuring a Boot Device on the EMC Storage Arrayc. At the OK> prompt, type setenv auto-boot? true and press
52EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentConfiguring a Boot Device on the EMC Storage ArrayTroubleshootingThis sect
Configuring a CLARiiON boot device53Configuring a Boot Device on the EMC Storage ArrayConfiguring a CLARiiON boot deviceYou can use either a native-na
54EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentConfiguring a Boot Device on the EMC Storage Array6. For each partition yo
Configuring a CLARiiON boot device55Configuring a Boot Device on the EMC Storage Array9. Add the following lines to /bootarray/etc/system:rootfs:ufsro
56EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentConfiguring a Boot Device on the EMC Storage Arrayb. Set the boot ID:<W
Configuring a CLARiiON boot device57Configuring a Boot Device on the EMC Storage ArrayOutput from example:Now run the format command.2. On the target
58EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentConfiguring a Boot Device on the EMC Storage Array6. Change to the root di
Configuring a CLARiiON boot device59Configuring a Boot Device on the EMC Storage ArrayAfter:9. Add the following lines to the end of /bootarray/etc/sy
6EMC Fibre Channel with Emulex Host Bus Adapters in the Solaris EnvironmentPrefaceCAUTION!A caution contains information essential to avoid data loss
60EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris EnvironmentConfiguring a Boot Device on the EMC Storage ArrayExample:" /ssm@0,0
EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment61Bboot device, CLARiiON, configuring 53boot device, Symmetrix, configuring
EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment62Index
EMC Fibre Channel with Emulex Host Bus Adapters in the Solaris Environment7PrefaceWhere to get help EMC support, product, and licensing information ca
8EMC Fibre Channel with Emulex Host Bus Adapters in the Solaris EnvironmentPreface
Installing and Configuring the HBA and Driver91Invisible Body Tag This chapter describes the procedures for installing an EMC-approved QLogic host
Kommentare zu diesen Handbüchern