Qlogic QLogic 12000 Series Installationsanleitung Seite 77

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 134
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 76
1–Installation
Component LEDs
D000140-001 D 1-67
12200 and 12300
Figure 1-59. 12200 and 12300LEDs
IB Port LEDs
Each module IB port has a Green IB link status LED that provide the following
indications:
On - the logical link is up (port is in the Active state).
Off - the physical link is down (port is in the Down state).
Status
The status LED indicates one of the following conditions:
Steady Green - the module is operating normally.
Blinking Green - LED test state.
Off - module is in the removable state.
Attention
The Attention LED indicates one of the following conditions:
Off - the system functioning normally.
Steady Amber - the system requires some attention, which could indicate
one of the following conditions:
The switch temperature is at a warning level on the module.
The switch silicon temperature is at a warning level (approximately 90
degrees C).
Seitenansicht 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 133 134

Kommentare zu diesen Handbüchern

Keine Kommentare