Qlogic Fibre Channel HBA and VM Betriebsanweisung PDF herunterladen (Seite 24)

Configuration

Configuring the Driver Parameters

3-6 FC0054606-00 A

Configuring the Driver Parameters

Use the esxcfg-module command to configure the QLogic FC adapter driver

parameters.

To configure driver parameters:

1. To list the driver parameters, execute the following command:

# esxcfg-module -g qla2300_707_vmw

2. To set the driver parameters, execute the following command:

# esxcfg-module -s <options> qla2300_707_vmw

where <options> is one of the configurable parameters listed in Table 3-1

on page 3-7.

For example, the following command sets the maximum device queue depth

reported by the QLogic to a value of 32:

# esxcfg-module -s ql2xmaxqdepth=32 qla2300_707_vmw

3. To update the ESX bootstrap image, execute following command:

# esxcfg-boot -b

4. For the preceding changes to take effect, reboot the server as follows:

# reboot

Table 3-1 lists all the QLogic driver configurable parameters and provides a brief

description of each.

NOTE:

All configuration changes made using the esxcfg-module -s command

are persistent, meaning that the configuration changes will be saved across

system reboots.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

Keine Kommentare

Qlogic Fibre Channel HBA and VM Betriebsanweisung Seite 24