Qlogic QLA2100F Bedienungsanleitung PDF herunterladen

QLogic Corporation

QLA2100F PCI Fibre Channel Adapter

RELEASE NOTES FOR SYMMETRIX ICDA SYSTEM

UPDATED: July 27, 1999

This release note file contains the latest product information for the

QLogic QLA2100F-EMC PCI Host Bus Adapter (HBA) Solaris X86 driver. This

release note also can be found on the QLogic web page: http://www.qlc.com

CAUTION: Solaris and Solaris x86 drivers are not interchangeable.

Please install the correct driver and refer to the list below for correct driver

name.

HBA Part Number Driver Name Driver Package

=============== =========== ==============

QLA2100F-EMC qla2100 qla2100.Z

For complete installation and use instructions, please see the Symmetrix Fibre

Channel Product Guide (P/N 200-999-642) and/or the QLogic Hardware Install

Guide qla2000/2000F/2100/2100F/2200/2200F (P/N FC0151102-00).

This document is divided into the following sections:

I. CD ROM CONTENTS

II. QLA2100F HBA ISSUES

1. ADAPTER FIRMWARE CONFIGURATION

III. QLA2100F SOLARIS X86 DRIVER ISSUES

1. HOST DRIVER CONFIGURATION VARIABLES

2. HOST DRIVER CONFIGURATION VARIABLE VALUES

3. HOST DRIVER CONFIGURATION VARIABLE DESCRIPTION and VALID

VALUES

IV. HOST CONFIGURATION FILES AND VARIABLES

1. /etc/system

2. /kernel/drv/sd.conf

V. SUPPORTED ENVIRONMENT

1. Patch list

I. CD ROM CONTENTS

This CD ROM contains several drivers which are supporting for NT, NETWARE,

SOLARIS, and SOLARIS x86 operating systems.

The QLA2100F driver for SOLARIS X86 is qla2100.Z Version 2.20 and resides

under/cdrom/qla2100/sparcX86 directory. Currently, it is qualified to support

Arbitrated Loop topology.

II. QLA2100F HBA ISSUES

There are no Known Adapter issues for qla2100F that effect Symmetrix

operation.

1. ADAPTER FIRMWARE CONFIGURATION

During Boot Press <Alt> Q when the qla2100F banner is displayed to enter

Fast!Util Options Menu.

Under Configuration Settings

1) Change all settings to default

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1

QLogic CorporationQLA2100F PCI Fibre Channel AdapterRELEASE NOTES FOR SYMMETRIX ICDA SYSTEMUPDATED: July 27, 1999This release note file contains the l

Seite 2

Under Advanced Adapter Settings2) Change Max Throttle to 203) Change Max Luns to 128When exiting Fast!Util, save all changes and reboot.III.

Seite 3

unix: QLogic qla2100 Fibre Channel Driver v2.20 Instance : 0unix: pcplusmp: pci1077,1 (qla2100) instance #0unix: vector 0x10 ioapic 0x4 intin 0x23is b

Seite 4

performance. Maximum value may be less depending on the size of thefirmware.Valid Values 1 - 750Default Value 512hba0-executionThrottle Maximum nu

Seite 5

Enables the adapter to directly access memory above 4 gigabytes with 64-bitDirect Memory Access addressing.Valid Values 0 (disable) or 1 (enable)D

Seite 6

hba0-loop-down-timeoutTime the driver will wait for a Fibre Channel loop to come up before reportingthe failure. Small values may report transient er

Seite 7

same port ID. In a hub environment, each Symmetrix port must have adifferent Hard Loop ID (Target ID).Example of sd.conf for Arbitrated Loop in a Hubl

Seite 8

VI. SUPPORTED ENVIRONMENTQLA2100F PCI Host Bus Adapter including driver 2.20 have been qualified andsupported to run on the following: NCR 4300, N

Kommentare zu diesen Handbüchern

Keine Kommentare

Qlogic QLA2100F Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Nein Qlogic QLA2100F herunter. QLogic Corporation QLA2100F PCI Fibre Channel Adapter Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Qlogic QLA2100F