Qlogic QLE4062C Bedienungsanleitung PDF herunterladen (Seite 6)

White Paper

6. Reboot Solaris to let the newly added LUNs be found.

7. Run the following command after reboot.

# grep qla4xxx /var/adm/messages

...

Feb 10 10:30:19 hostname:[ID xxxxxx kernel.info] sd10 at qla4xxx target2

lun0

...

The message indicates the SCSI device entry which is created in

/kernel/drv/sd.conf file. This file must be set properly; otherwise the iSCSI

target would not be detected. Here are two examples for reference.

Example 1: Connect to P210C with two IP portals shared the same nodename.

Attach to 3 LUNs which are LUN 0, 1, 254.

After connecting the iSCSI target with QLogic QLE4062C, the messages are

displayed like the following.

- 6 -

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

Qlogic QLE4062C Bedienungsanleitung Seite 6