Qlogic SANsurfer FC HBA Manager Bedienungsanleitung PDF herunterladen (Seite 9)



emartek

Emulex HBAnyware Software Evaluation

January 2007

Page 9 of 9

Appendix A – Evaluation Environment

This evaluation was conducted at the Demartek facilities, using two identical servers running

Windows 2003 Server R2 Enterprise Edition, each with Intel Pentium D 950 processors (dual-core,

3.4 GHz) and 4 GB RAM. The tests were run with the 64-bit version (x64) of Windows Server on

both servers and repeated with the 32-bit version of Windows Server on both servers. There were

no differences in the look or feel of the HBA management software between the 64-bit and 32-bit

versions of Windows Server. All the screen shots in this report were taken on 64-bit systems.

Four HBAs were provided by Emulex, two LP11000 and two LP1150 HBAs. These HBAs are

single-port, 4-gigabit fibre channel using PCI-X slots in the servers. They were connected into an

existing fibre channel storage infrastructure at the Demartek facilities. Emulex HBAnyware version

3.0a16 was used for these tests.

The QLogic HBAs included a QLE2460 HBA in each server and a QLA2340 HBA in each server.

The QLE2460 HBAs are single-port, 4-gigabit fibre channel using PCI-e slots in the servers. The

QLA2340 HBAs are single-port, 2-gigabit fibre channel using PCI-X slots in the servers. QLogic

SANsurfer FC HBA Manager version 2.0.30 Build 89 was used for these tests.

Emulex, HBAnyware, and AutoPilot Installer are registered trademarks, and AutoPilot Manager is a trademark, of

Emulex Corporation.

QLogic, the QLogic logo, and SANsurfer Management Suite are registered trademarks of QLogic Corporation.

All other trademarks are the property of their respective owners.

1 2 3 4 5 6 7 8 9

Keine Kommentare

Qlogic SANsurfer FC HBA Manager Bedienungsanleitung Seite 9