Qlogic Fibre Channel NPIV Storage Networking Guide Wartungshandbuch

DATA CENTER How to Configure NPIV in a Microsoft Hyper-V Environment Designed for Windows System Administrators and Storage Admin

DATA CENTER TECHNICAL BRIEF Using Virtual Disks  For performance reasons, it is recommended that you use a fixed disk. When choosing the size

DATA CENTER TECHNICAL BRIEF VERIFYING THAT NPIV IS WORKING The quickest way to se if NPIV is working is to make sure that the LUN(s) being used

DATA CENTER TECHNICAL BRIEF Setting Up NPIV with Brocade HCM and Microsoft Hyper-V 12 of 12  To get this detail, run the FOS CLI command ns

DATA CENTER TECHNICAL BRIEF CONTENTS Introduction...

DATA CENTER TECHNICAL BRIEF INTRODUCTION This document is a guide to configuring Microsoft® Hyper-V using NPIV with a Brocade® Fibre Channel to

DATA CENTER TECHNICAL BRIEF TEST CONFIGURATION The test infrastructure, shown in Figure 2, included four servers:  Windows Domain Controller (

DATA CENTER TECHNICAL BRIEF Virtual and Passthrough Disks When you are using a virtual disk, the configuration files and the virtual disk file i

DATA CENTER TECHNICAL BRIEF Configuring the Host 1. Disable automount: turn off automount for the disks on each host. (VMM automatically mounts

DATA CENTER TECHNICAL BRIEF 3. In the Virtual Port Creation dialog, enter the symbolic name and name of the guest that will be used to store th

DATA CENTER TECHNICAL BRIEF Configuring Storage 1. On the storage, add the virtual port to the LUN that will contain the guest. You do not need

DATA CENTER TECHNICAL BRIEF viii. When you create a GPT partition, some space is offset so that the storage aligns to the correct block. This m